Click Here for New Alternator and Starter Information

After your starter is received for repair or service it is assigned a repair ID number and service technician who will personally complete the entire reconditioning of your product.
Following a complete disassembly all the major parts are visually inspected and electronically tested.
Using precision measuring equipment the end housing bushings are checked for proper size and replaced as required.

The armature is tested for ground, short or open circuits and proper current flow. When open windings are discovered in our testing procedures we solder the commentator as needed. After completion of this service procedure the armature preforms like a new part at a huge savings to the customer. If the armature is shorted beyond repair we will most always have a replacement available from our 5000 square foot inventory of repair and replacement parts. Replacement of the armature will increase the repair prices so we always compare prices of quality replacement units that may be priced less than our final repair cost to the customer.

Field coils are thoroughly tested for amp draw and ground. A visual inspection of the cover assures that no premature grounding can occur.
Brush holders are thoroughly cleaned, spring tension checked and brushes replaced on every unit. We try to keep the cost of re manufacturing your unit down by re using the brush holder as long as it test within or rigid specifications.

Once all required parts are gathered the sub assemblies are put together, checked for proper movement the starter is then fully assembled and all fasteners torqued to specification.

Before receiving it's final coat of factory paint the assembled starter is sent to our Quality Assurance Technician for a 3 step testing process that will assure proper operation and longevity to your repaired starter.

A special note on PMGR Permanent Magnet Gear Reduction starters. In addition to all the above test and repairs the PMGR starter's have extensive testing performed on the permanent magnets to make sure they are within our tight specifications.

All starters repaired at Toledo Auto Electric have the following warranty
90 days labor and 18 month parts "No Quibble Warranty".

Our technician's recommend that you make sure that the battery or batteries are properly charged. Charging system is operating at peak efficiency and all cables ends and electrical connections are clean and tight.

E-Mail

Click Here For UPS Shipping Information